Sectional Warping Machine

Item Code: Lasertech-140

DETAILED REQUIREMENT (BUYER END)

1. YOUR LOOMS WORKING WIDTH
2. BEAM FLANGE DIAMETER
3. TYPE OF YARNS
4. BUYER LOCATION

Our prestigious clients can avail from us, an excellent quality array of Sectional Warping Machine. This machine is manufactured using advanced methodologies and equipment as per the set industry standards. Moreover, our quality controllers inspect this range on diverse quality parameters in order to ensure delivery of defect-free product at the clients' end. Available in various technical specifications, clients can avail this machine at rock bottom prices.

• Working width 2200 mm, 2400 mm, 3400 mm, 4000 mm
• Fixed cone, metallic Drum dynamically balance
• Drum cone Angle : 9 or 11 degree & Circumference 3.0 mtrs
• Section Width 300 mm standard (more than 330 mm is at extra cost)
• Uniform Tension Control of Section between warp table & the Creel is Maintained continuously by means of load cell mounted on the warp table
• Laser Sensor determines the pitch of the table travellers to obtain the precise built up of yarn on drum during warping
• Specially Designed Liner Guides ensure very precise movement of warp table (virtually no play X and Y axis of warp table & rail)
• Max. possible Length of the beam Barrel will be = working width of machine + 400 mm (More than 400 mm will be at Extra Cost)
• Additional Beam adaptor supplied at extra cost (Only one set is supplied with machine)
• Ac drive variable speed separate motors for warping & beaming
• Hydraulic Disc brakes on both sides, stopping of drum at exact position at the end of section and auto stop at the point of lease chord insertion
• Auto braking in case of power failure
• Programmable logic Controller (PLC) with various functions & Data (List attached) Control Panel with auto temperature control facility by Air Conditioning unit
• Computerized system for digital or paper print out of Production and stoppage data for every beam
• Separate Beaming device for winding high tension beam
• Three Roller system for liquid wax/oil with circulation system from tank of 30-40 litres
• Static Eliminator on traverse table
• Flat reed with fine angular adjustments & Auto back system
• Uniform beam tension automatically maintained and displayed on screen from start to finish of beam as per present data by load cell & proportional control valve
• Beam donning & doffing hydraulically operated
• Engaging & disengaging of beam by motorised operation on Beamer
• Specially designed advanced Safety Device with Optical sensor for instant stopping of machine
• Ergonomically designed structure of machine
• Power supply 440 V-AC + 5% 50 Hz, 3 phase