Currency INR
Medium Setting Bitumen Emulsion MS buy in Ahmedabad
Buy Medium Setting Bitumen Emulsion MS
Medium Setting Bitumen Emulsion MS

Medium Setting Bitumen Emulsion MS

In stock
Reconfirm the price with seller
Shipping:
Seller
India, Ahmedabad
(View map)
+91( 
Display phones
Products of other enterprises
Description

Break is sufficiently slow that the emulsion can be mixed with coarse aggregate containing a high proportion of fine material.
KEY FEATURES: •Emulsion used for pot hole repair/patch work •Suitable for 20 mm pre-mix carpet
MAINTENANCE MIX: This high quality material now makes it possible to fill pot holes or carry out patch repair with open graded cold premix made on-site. The methods typically used for the repair of pot holes using asphalt emulsions are throw-and-roll and full-depth removal and replacement. All of these methods involve placing cold mix in the pot hole with a shovel and compacting with a truck tire, vibratory plate compactor or steel wheeled roller.
The procedure consists of
•Blow off water and debris from the pothole •Cut to rectangular shapes with all sides vertical •Remove loose material, if any •Spray tack coat of asphalt emulsion on all the side and bottom •Mix prepared of clean (preferably washed) and dry aggregates with MS cationic bitumen emulsion •Typically 13.2 mm and 11.2 mm sized aggregates mixed in 2:1 ratio •MS cationic bitumen emulsion content of approximately 7 % by weight of aggregates works best •Mix aggregates and emulsion properly to ensure good and uniform coating •Mix till entire emulsion is broken (turns to black in color) •Fill the premix immediately into the pot hole up to a level slightly higher than the adjoining road surface and roll properly •Cover the repaired area with tack coat followed by a layer of 6 mm (passing) aggregate •Open the repaired pothole to traffic as soon as workers and equipment are clear.
Contact the seller
Medium Setting Bitumen Emulsion MS
Medium Setting Bitumen Emulsion MS
Shipping method
Compare0
ClearSelected items: 0