Pneumatic Conveying Complete Systems

The system involves conveying piped sit, this being under suction using a centrifugal type fan which incidentally is the heart of a pneumatic system, a separator i the form of a cyclone, and a dust collector usually of the filter sleeve type, and a dust collection system usually consisting of either Reverse Jet Filter dust collector cleaned by a high pressure fan through a rotating manifold, or a similar filter cleaned by jets of compressed air controlled by an electrical timing mechanism, because of the large number of varied
stocks and relatively small quantities involved, all lifts, I.E. cyclones, can be connected up to a single fan. Each cyclone fitted with a control valve and then connected up to the manifold trunk terminated at the fan larger mills of course may have more than one fan, the pneumatic system being split into section. Cyclones used in pneumatic system have efficiency as high as 99.5, but it is still necessary to employ a dust collector to remove the remaining 0.5%. there are situated between the fan and the pneumatic manifold the main object being to prevent stock adhering to the fan blades and causing it to go out of balance.